Hello! Welcome to the official website of Guangdong Juquan Precision Electromechanical Equipment Co., Ltd.!
Guangdong Juquan Precision Electromechanical Equipment Co., Ltd.

Service Hotline

+86 13751201300
4Industry information

Basic knowledge of metal processing stamping parts


Metal stamping parts are widely used in various fields of our lives, including some electronic devices, auto parts, decorative materials and so on. The stamping parts we usually say refer to cold stamping parts. For example, an iron plate, if you want to turn it into a snack plate, you have to design a mold. The working surface of the mold is the shape of the plate. Pressing the iron plate with a mold becomes the plate you want. This is cold stamping, which is to directly punch the hardware with a mold.

Testing of metal stamping parts:

The hardness of the piece was measured using a Rockwell hardness tester. Small, complex-shaped stampings can be used to test small planes that cannot be tested on ordinary benchtop Rockwell hardness testers.

Stamping parts processing includes punching, bending, drawing, forming, finishing and other processes. The materials processed by stamping parts are mainly hot-rolled or cold-rolled (mainly cold-rolled) metal strip materials, such as carbon steel sheets, alloy steel sheets, spring steel sheets, galvanized sheets, tin-plated sheets, stainless steel sheets, copper and copper alloys. Plate, aluminum and aluminum alloy plates, etc.

The PHP series of portable surface Rockwell hardness testers are ideal for testing the hardness of these stamped parts. Alloy stampings are the most commonly used parts in metal processing and machine building. Stamping processing is a processing method in which a metal strip is separated or formed by a mold. Its application range is very broad.

The main purpose of the hardness testing of stamping materials is to determine whether the degree of annealing of the purchased metal sheets is suitable for the subsequent stamping parts processing. Different types of stamping parts processing processes require sheets of different hardness levels. The aluminum alloy plate used for stamping processing can be tested by a Vickers hardness tester. When the material thickness is greater than 13 mm, the Barcol hardness tester can be used. The pure aluminum plate or the low hardness aluminum alloy plate should be a Barcol hardness tester.

In the stamping industry, stamping is sometimes referred to as sheet forming, but with a slight difference. The term "sheet forming" refers to a forming method in which plastic working is performed using a sheet material, a thin-walled tube, a thin profile or the like as a material, and is generally referred to as sheet forming. In this case, deformation in the direction of the thick plate is generally not considered.

Guangdong Juquan Precision Electromechanical Equipment Co., Ltd. © Copyright 2018 【Admin